Sunday, February 21, 2010

How do i stop paint peeling in my bathroom?

Do what I did and buy special moisture-resistant paint. It works.How do i stop paint peeling in my bathroom?
what embromtion fufreeHow do i stop paint peeling in my bathroom?
Get a plastic shower stall kit.
to STOP peeling, get rid of the excess moisture. There is a product called DAMP RID (in a tub with crystals that absorb extra moisture) especially good for laundry areas, and bathrooms. Really works. Of course any peeling that has started will have to be removed and repainted.
sand all the peeling spots till they feel smooth and blended in.. prime and paint with bathroom paint.. add a exhust fan 2 bathtoom or a reg fan.. maybe even wipe down your walls with a towel when your done showering..
Use a paint designed for rooms like bathrooms and kitchens. It's the steam that makes it peel so you only really have 2 choices:


Buy the bathroom paint


or


Stop washing!


I know which i would chose
I know that you can do this a lot cheaper than using the special paint. Us a mix of 50% PVA glue and 50% water to paint over the area that is peeling. (Best idea would obviously be to remove the flaky bits first!!) Then paint on top of the area with regular paint. I know this works as I saw it on a DIY programme on TV. My pareants had the same problem in their bathroom and it worked for them. Good luck.
Cheezy is right. Most likely the last person who painted it didn't prepare it properly. The surface was probably glossy or dirty, maybe chalky or greasy.





To correct the problem, you need to scrape off all the loose paint. Wherever the paint is adhering to the wall, don't try to force it off with the scraper. Just remove what comes off easily.





Then sand lightly with 200 sandpaper. You don't have to sand hard -- just scuff up the surface to give the new paint something to stick to. After sanding, wash the walls with ammonia and water, dish soap, or TSP. Make sure to go over the surface with clean water to get rid of all residue.





If the old paint is thick, you might want to spackle the edges where the paint peeled, if it looks bad.





Next comes priming, which is important. The primer has good adhesion, and then in turn the paint adheres well to it.





Once you get to the painting, it's going to feel like a breeze after all your prep. You'll be glad you did all that, because your new paint job will last a long time.
when u have a bath/shower open the window %26amp; leave it open 4 a 1hr after
leave windows open to prevent steam build up which causes paint to flake n peal or invest in the special paint for bathroom and kitchen areas that is resistant to steam
paint it with bathroom paint, made to withstand moisture. only way i know
it wasn't primed properly. scrape it all off %26amp; use a good primer then repaint
Cleaning and priming is important as the other answers have stated.





I'm going to suggest that you consider tileing the bathroom walls instead of painting them. This isn't to make the paint or tiles stick better but it's an opportunity to improve the room and I think that tiles make a bathroom look great.
use a bathroom paint, or egg shell ( oil based ) not regular emulsion,


if problems persist invest in a decent extractor fan ie. vent axia etc, with a run on, it saves you leaving your windows open like someone else suggested!
you can try using exterior emulsion, i did it worked fine ,and keep the window open when the bathroom is in use to get rid of the steam
Install a GOOD exhaust fan to take out the ';fog'; of the shower. If this doesn't do the trick, run a dehumidifier in the house.
why do u want to peel paint in your bathroom

No comments:

Post a Comment